Advertisement
Item No.
U070
Adjusting the DP magnification
Description
Adjusts the DP original scanning speed.
Purpose
Perform this adjustment if the magnification is incorrect in the auxiliary scanning direction when
the DP is used.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original on the DP and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.l
Display
Sub Scan(F)
Sub Scan(B)
Main
Scan(CIS)
Sub
Scan(CIS)
*1: Reversed DP only. *2: Dual scan DP only.
Adjustment: [Sub Scan]
1. Change the setting value using the +/- keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
Increasing the value makes the image longer, while decreasing the value makes the image
shorter.
2. Press the start key. The value is set.
Y116141-8
Description
Magnification in the auxiliary
scanning direction of CCD
(first side)
Magnification in the auxiliary
*1
scanning direction of CCD
(second side)
Magnification in the main scan-
ning direction of CIS
*2
Magnification in the auxiliary
scanning direction of CIS
*2
Original
Description
Setting
range
-125 to 125 0
-125 to 125 0
-100 to 100 0
-125 to 125 0
Copy
Copy
example 2
example 1
Figure 1-3-11
1-3-49
Initial
Change in
setting
value per step
0.02 %
0.02 %
0.02 %
0.02 %
Service Manual
2NP
Advertisement
