Advertisement
Item No.
U640
Setting communication time 1
Description
Sets the detection time when one-shot detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Sets the detection time when continuous detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Method
1. Press the start key.
2. Select the item to be set.
Time (One)
Time (Cont)
Setting:[Time (One)]
1. Change the setting using the +/- keys or numeric keys.
One-shot detection time for remote switching
2. Press the start key. The value is set.
Setting:[Time (Cont)]
1. Change the setting using the +/- keys or numeric keys.
Continuous detection time for remote switching
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116141-8
Display
Sets the one-shot detection time for remote switching.
Sets the continuous detection time for remote switching.
Description
Description
Description
Description
Setting range
0 to 255
Setting range
0 to 255
1-3-179
2NP
Initial setting
7
Initial setting
80
Service Manual
Advertisement
