Advertisement
Item No.
U067
Adjusting the scanner center line
Description
Adjusts the scanner center line of the original scanning.
Purpose
Perform this adjustment if there is a unmatching error between the center lines of the copy image
and original.
Adjustment
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
Front
Rotate
6. Change the setting value using the +/- keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
7. Press the start key. The value is set.
Caution
Check the copy image after the adjustment. If the image is still incorrect, perform the following
adjustments in maintenance mode.
U034
( P.1-3-37)
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116141-8
Description
Description
Scanner center line
Scanner center line (rotate
copying)
Scanner center line (within ± 2.0 mm)
Original
Figure 1-3-10
U065
U067
( P.1-3-44)
1-3-47
Setting
range
-60 to 60
-40 to 40
Copy
Copy
example 1
example 2
Initial
Change in
setting
value per step
0
0.085 mm
0
0.085 mm
Service Manual
2NP
Advertisement
