Advertisement
Item No.
U615
Setting system 6
Description
Makes settings for fax reception regarding the sizes of the fax paper and received images.
Purpose
To set the maximum recording width and processing method when 11" width fax paper is loaded
on an inch specification machine.
Setting
1. Press the start key.
2. Select [RX Width For 11"].
3. Select the item to be set.
Ledger
B4
* : Initial setting: Ledger
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U620
Setting the remote switching mode
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to
the type of telephone connected to the machine.
Setting
1. Press the start key.
2. Select [Remort Mode].
3. Select the mode.
One
Cont
* : Initial setting: One
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y116141-8
Display
Communicates to the destination unit 11" width as A3 width
and records at 100% magnifications.
Communicates to the destination unit 11" width as B4 width.
Display
One-shot detection
Continuous detection
Description
Description
Description
1-3-171
2NP
Service Manual
Advertisement
