Advertisement
Item No.
U203
Checking DP operation
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.
Normal Speed
High Speed
Mode
Reset
Result
4. Select the item to be operated.
CCD ADP
CCD RADP
CIS
CCD ADP (Non-P)
CCD RADP (Non-P)
CIS (Non-P)
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Setting: [Mode]
1. Select On or Off.
On
Off
2. Press the start key.
Setting: [Reset]
1. Select [Execute].
2. Press the start key.
Service Manual
Display
Normal reading (600 dpi)
High-speed reading
Sets the conveying timing verification mode
Resets the conveying timing verification data
Resets the conveying timing verification data
Display
With paper, single-sided original of CCD
With paper, double-sided original of CCD
With paper, double-sided original of CIS
Without paper, single-sided original of CCD
(continuous operation)
Without paper, double-sided original of CCD
(continuous operation)
Without paper, double-sided original of CIS
(continuous operation)
Display
Sets the conveying timing verification mode on
Sets the conveying timing verification mode off
Description
Description
Description
Description
1-3-92
2NP
Y116141-8
Advertisement
