Advertisement
Item No.
U106
Setting the voltage for the secondary transfer
Description
Sets the control voltage for the secondary transfer.
Purpose
To change the setting when any density problems, such as too dark or light, occur.
Method
1. Press the start key.
2. Select the item. The screen for executing each item is displayed.
Color
B/W
Method:[Color]
1. Select the item. The screen for executing each item is displayed.
Light/Normal1
Normal2/3
Heavy1
Heavy2/3
OHP
Coated
Method: [Light/Normal1 / Normal2/3 / Heavy1 / Heavy2/3]
1. Select the item. The screen for executing each item is displayed.
1st side
2nd side
Setting:[1st side/2nd side]
1. Select the item to be set.
2. Change the setting value using the +/- keys or numeric keys.
Display
Width<160
160<=Width<220 160<= width of paper <220
220<=Width
3. Press the start key. The value is set.
Y116141-8
Display
Correction value of color printing
Correction value of monochrome printing
Display
Weight of paper (light to usual 1)
Weight of paper (usual 2 to 3)
Weight of paper (heavy 1)
Weight of paper (heavy 2 to 3)
Kind of paper (OHP)
Kind of paper (Coated paper)
Display
Correction value of single-side printing
Correction value of duplex printing
width of paper<160
220<= width of paper
Description
Description
Description
Description
Description
1-3-67
Setting
Initial
range
setting
0 to 200
83/85/64/43
88/90/68/45
0 to 200
58/60/45/30
60/62/47/31
0 to 200
42/44/33/22
40/42/32/21
Service Manual
2NP
Advertisement
