Advertisement
Item No.
U201
Multi Tap chek
1. Select "Multi tap check", and press the
start key.
2. Press two "
(Step1)
* : If the detecting values are not within
the setting values, pressed detecting
positions are displayed by red
points.
3. Press two "
the same time. (Step2)
4. If the detecting values are within the
setting values, Step1 and Step2
become "Completed".
5. If "Multi tap check completed." is dis-
played, the checking process is com-
pleted successfully.
Y116141-8
" signs at the same time.
" signs displayed next at
1-3-89
Description
Initialize
Multi Tap Check. Step 1.
Press both circles. Finalize with both pressed at the same time.
* Press with the tips of your fingers. (NOT your fingernails)
Initialize
Multi Tap Check. Step 2.
Press both circles. Finalize with both pressed at the same time.
* Press with the tips of your fingers. (NOT your fingernails)
Multi Tap Check completed.
The screen for selecting a maintenance item No. is displayed.
Step1 : Not completed
Step2 : Not completed
Figure 1-3-28
Step1 : Completed
Step2 : Not completed
Figure 1-3-29
Step1 : Completed
Step2 : Completed
Press the Stop key.
Figure 1-3-30
Service Manual
2NP
Advertisement
