Advertisement
Item No.
U206
3. Change the setting value using the +/- keys.
Display
A3-Ledger
B4
Card
Other
In 10-yen increments
Value of 0 allows non-restricted copying. (At a periodic maintenance, etc.)
Setting: [ Apl]
1. Select the item to be set.
2. Change the setting value using the +/- keys.
Display
Apl1
Apl2
Apl3
Apl4
Apl5
3. Press the start key. The value is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Setting: [Boot Mode]
1. Select the item.
Normal
Copy Service
Initial setting: Copy Service
2. Press the start key. The setting is set.
Setting: [Apl Charge Mode]
1. Select the item.
On
Off
Initial setting: Off
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Service Manual
Description
A3/Ledger size
B4 size
Post card
Other
Description
Expanded charging unit 1
Expanded charging unit 2
Expanded charging unit 3
Expanded charging unit 4
Expanded charging unit 5
Display
Assign activation to normal mode.
Assign activation to copy service display.
Display
The extended charge unit is used.
The extended charge unit is not used.
Description
Setting
range
0 to 300
0 to 300
0 to 300
0 to 300
Setting range
0 to 300
0 to 300
0 to 300
0 to 300
0 to 300
Description
Description
1-3-96
Initial
setting
B/W
CMY/RGB
Full Color
10
100
10
50
10
30
10
50
Initial setting
10
10
10
10
10
Y116141-8
2NP
Advertisement
