Advertisement
Item No.
U905
Checking counts by optional devices
Description
Displays the counts of document processor or document finisher.
Purpose
To check the use of document processor or document finisher.
Method
1. Press the start key.
2. Select the device to be checked. The count of the selected device is displayed.
DP
DF
DP
Display
ADP
RADP
CIS
DF
Sorter
Staple
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U906
Resetting partial operation control
Description
Resets the service call code for partial operation control.
Purpose
To be reset after partial operation is performed due to problems in the cassettes or other sec-
tions, and the related parts are serviced.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key to reset partial operation control.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Service Manual
Display
Counts of document processor
Counts of document finisher
Counts of single-sided originals that has passed through the DP
Counts of double-sided originals that has passed through the DP
Counts of Double-sided simultaneous reading originals that has
passed through the DP
Display
Counts of copies that has passed through the sorter
Frequency the stapler has been activated
Description
Description
Description
Description
1-3-196
2NP
Y116141-8
Advertisement
