Advertisement
Item No.
U699
Setting the software switches
Description
Sets the software switches on the FAX control PWB individually.
Purpose
To change the setting when a problem such as split output of received originals occurs.
Since the communication performance is largely affected, normally this setting need not be
changed.
Method
1. Press the start key.
2. Press [SW No.].
3. Enter the desired software switch number (3 digits) using the +/- keys or the numeric keys
and press the start key.
4. Use numeric keys 0 to 7 to switch each bit between 0 and 1.
5. Press the start key to set the value.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
List of Software Switches of Which the Setting Can Be Changed
<Communication control procedure>
No.
36
37
38
41
42
Y116141-8
Bit
Item
7654 Coding format in transmission
3210 Coding format in reception
5 33600 bps/V34
4 31200 bps/V34
3 28800 bps/V34
2 26400 bps/V34
1 24000 bps/V34
0 21600 bps/V34
7 19200 bps/V34
6 16800 bps/V34
5 14400 bps/V34
4 12000 bps/V34
3 9600 bps/V34
2 7200 bps/V34
1 4800 bps/V34
0 2400 bps/V34
3 FSK detection in V.8
4 4800 bps when low-speed setting is active
2 FIF length in transmission of more than 4 times of DIS/DTC signal
1-3-191
Description
2NP
Service Manual
Advertisement
