SMC Networks EliteConnect SMC2555W-AG2 User Manual page 67

6
System Configuration
CLI Commands for RADIUS MAC Authentication – Use the mac-authentication
server command from the global configuration mode to enable remote MAC
authentication. Set the timeout value for re-authentication using the mac-
authentication session-timeout command. Be sure to also configure connection
settings for the RADIUS server (not shown in the following example). To display the
current settings, use the show authentication command from the Exec mode.
Enterprise AP(config)#mac-authentication server remote
Enterprise AP(config)#mac-authentication
session-timeout 300
Enterprise AP(config)#exit
Enterprise AP#show authentication
Authentication Information
===========================================================
MAC Authentication Server
MAC Auth Session Timeout Value : 300 min
802.1x supplicant
802.1x supplicant user
802.1x supplicant password
Address Filtering
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address
-----------------
00-70-50-cc-99-1a
00-70-50-cc-99-1b
=========================================================
Enterprise AP#
CLI Command for 802.1x Supplicant – To configure the access point to operate as a
802.1X supplicant, first use the 802.1X supplicant user command to set a user
name and password for the access point, then use the 802.1X supplicant command
to enable the feature. To display the current settings, use the show authentication
command from the Exec mode (not shown in the following example)
Enterprise AP(config)#802.1X supplicant user SMC2555W dot1xpass
Enterprise AP(config)#802.1X supplicant
Enterprise AP(config)#
6-16
: REMOTE
: DISABLED
: EMPTY
: EMPTY
: DENIED
Status
----------
DENIED
ALLOWED
7-72
7-72
7-68
7-68
7-68