SMC Networks EliteConnect SMC2555W-AG2 User Manual page 86

Logging Level – Sets the minimum severity level for event logging.
(Default: Informational)
The system allows you to limit the messages that are logged by specifying a
minimum severity level. The following table lists the error message levels from the
most severe (Emergency) to least severe (Debug). The message levels that are
logged include the specified minimum level up to the Emergency level.
Error Level
Emergency
Alerts
Critical
Error
Warning
Notice
Informational
Debug
Note: The access point error log can be viewed using the Event Logs window in the
Status section (page 6-91). The Event Logs window displays the last 128
messages logged in chronological order, from the newest to the oldest. Log
messages saved in the access point's memory are erased when the device is
rebooted.
Logging Facility Type – Sets the facility type for remote logging of syslog messages.
The command specifies the facility type tag sent in syslog messages. (See RFC
3164.) This type has no effect on the kind of messages reported by the switch.
However, it may be used by the syslog server to sort messages or to store
messages in the corresponding database. (Range: 16-23; Default: 16)
Description
System unusable
Immediate action needed
Critical conditions (e.g., memory allocation, or free memory error - resource
exhausted)
Error conditions (e.g., invalid input, default used)
Warning conditions (e.g., return false, unexpected return)
Normal but significant condition, such as cold start
Informational messages only
Debugging messages
Advanced Configuration
6
6-35