Status Information; Access Point Status - SMC Networks EliteConnect SMC2555W-AG2 User Manual

• 802.1X Reauthentication Refresh Rate: The time period after which a connected
client must be re-authenticated. During the re-authentication process of verifying
the client's credentials on the RADIUS server, the client remains connected the
network. Only if re-authentication fails is network access blocked. (Range: 0-65535
seconds; Default: 0 means disabled)
CLI Commands for 802.1X Authentication – Use the 802.1X supported command
from the VAP interface mode to enable 802.1X authentication. Set the session and
broadcast key refresh rate, and the re-authentication timeout. To display the current
settings, use the show interface wireless command from the Exec mode (not
shown in the example).
Enterprise AP(if-wireless g: VAP[0])#802.1X supported
Enterprise AP(if-wireless g: VAP[0])#802.1X
broadcast-key-refresh-rate 5
Enterprise AP(if-wireless g: VAP[0])#802.1X
session-key-refresh-rate 5
Enterprise AP(if-wireless g: VAP[0])#802.1X
session-timeout 300
Enterprise AP#

Status Information

The Status page includes information on the following items:
Menu
AP Status
Station Status
Event Logs

Access Point Status

The AP Status window displays basic system configuration settings, as well as the
settings for the wireless interface.
Description
Displays configuration settings for the basic system and the
wireless interface
Shows the wireless clients currently associated with the access
point
Shows log messages stored in memory
6
Status Information
7-65
7-66
7-67
7-67
Page
6-85
6-88
6-91
6-85