SMC Networks EliteConnect SMC2555W-AG2 User Manual page 107

6
System Configuration
Configuring Common Radio Settings
To configure common radio settings, select the Radio Settings page, and scroll down
to below the VAP radio settings.
Turbo Mode – The normal 802.11a wireless operation mode provides connections
up to 54 Mbps. Turbo Mode is an enhanced mode (not regulated in IEEE 802.11a)
that provides a higher data rate of up to 108 Mbps. Enabling Turbo Mode allows the
access point to provide connections up to 108 Mbps. (Default: Disabled)
Note: In normal mode, the access point provides a channel bandwidth of 20 MHz, and
supports the maximum number of channels permitted by local regulations (e.g.,
13 channels for the United States). In Turbo Mode, the channel bandwidth is
increased to 40 MHz to support the increased data rate. However, this reduces
the number of channels supported (e.g., 5 channels for the United States).
Note: Check your country's regulations to see if Turbo Mode is allowed.
6-56