SMC Networks EliteConnect SMC2555W-AG2 User Manual page 138

• Bootrom Version: Show the bootrom version number.
• Hardware Version: Shows the hardware version number.
AP Wireless Configuration – The AP Wireless Configuration tables display the radio
and VAP interface settings listed below. Note that Interface Wireless A refers to the
802.11a radio and Interface Wireless G refers the 802.11b/g radio.
• SSID: The service set identifier for the VAP interface.
• Radio Channel: The radio channel through which the access point communicates
with wireless clients.
• Encryption: The key size used for data encryption.
• Authentication Type: Shows the type of authentication used.
• 802.1X: Shows if IEEE 802.1X access control for wireless clients is enabled.
CLI Commands for Displaying System Settings – To view the current access point
system settings, use the show system command from the Exec mode. To view the
current radio interface settings, use the show interface wireless a or show
interface wireless g command (see page 7-110).
Enterprise AP#show system
System Information
==========================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Management VLAN ID(AP): 1
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
Boot Rom Version
Software Version
SSH Server
SSH Server Port
Telnet Server
WEB Redirect
DHCP Relay
==========================================================
Enterprise AP#
: A123456789
: 0 days, 4 hours, 33 minutes, 29 seconds
: SMC
:
:
: US - UNITED STATES
: 00-30-F1-F0-9A-9C
: 192.168.1.1
: 255.255.255.0
: 0.0.0.0
: DISABLED
: ENABLED
: ENABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: v3.0.7
: v3.0.0.1
: ENABLED
: 22
: ENABLED
: DISABLED
: DISABLED
6
Status Information
7-23
6-87