SMC Networks EliteConnect SMC2555W-AG2 User Manual page 106

using the rogue-ap scan command. To view the database of detected access
points, use the show rogue-ap command from the Exec level.
Enterprise AP(config)#interface wireless g
Enter Wireless configuration commands, one per line.
Enterprise AP(if-wireless g)#rogue-ap enable
configure either syslog or trap or both to receive the rogue APs detected.
Enterprise AP(if-wireless g)#rogue-ap duration 200
Enterprise AP(if-wireless g)#rogue-ap interval 120
Enterprise AP(if-wireless g)#rogue-ap scan
Enterprise AP(if-wireless g)#rogueApDetect Completed (Radio G) : 5 APs
detected
rogueAPDetect (Radio G): refreshing ap database now
Enterprise AP(if-wireless g)#exit
Enterprise AP#show rogue-ap
802.11a Channel : Rogue AP Status
AP Address(BSSID)
=======================================================
802.11g Channel : Rogue AP Status
AP Address(BSSID)
=======================================================
00-04-e2-2a-37-23
00-04-e2-2a-37-3d
00-04-e2-2a-37-49
00-90-d1-08-9d-a7
00-30-f1-fb-31-f4
Enterprise AP#
SSID Channel(MHz) RSSI
SSID Channel(MHz) RSSI
WLAN1AP 11(2462 MHz)
ANY 7(2442 MHz)
WLAN1AP 9(2452 MHz)
WLAN1AP 1(2412 MHz)
WLAN 6(2437 MHz)
Radio Interface
7-113
7-115
7-115
7-116
7-117
17
42
42
12
16
6
7-88
6-55