SMC Networks EliteConnect SMC2555W-AG2 User Manual page 117

6
System Configuration
Most of the 802.11g commands are identical to those used by the 802.11a interface.
For information on the these commands, refer to the following sections:
• "Configuring VAP Radio Settings" on page 6-51
• "Configuring Rogue AP Detection" on page 6-53
• "Configuring Common Radio Settings" on page 6-56
• "Configuring Wi-Fi Multimedia" on page 6-60
Only the radio settings specific to the 802.11g interface are included in this section.
To configure the 802.11g radio settings, select the Radio Settings page.
Radio Mode – Selects the operating mode for the 802.11g wireless interface.
(Default: 802.11b+g)
• 802.11b+g: Both 802.11b and 802.11g clients can communicate with the access
point (up to 54 Mbps).
• 802.11b only: Both 802.11b and 802.11g clients can communicate with the access
point, but 802.11g clients can only transfer data at 802.11b standard rates (up to
11 Mbps).
• 802.11g only: Only 802.11g clients can communicate with the access point (up to
54 Mbps).
6-66