SMC Networks EliteConnect SMC2555W-AG2 User Manual page 40

Other non-diversity antennas, can be connected to either antenna connector and
then configured for usage using the antenna options in the user interface.
To connect pigtail cables to the access point, follow these steps:
1. Disable the access point radio using the web browser interface, CLI, or SNMP.
2. Remove power to the access point.
3. Remove both of the access point's antennas by unscrewing them at their base.
Unscrew antenna
to remove
4. For diversity antennas, connect the antenna pigtail cables to the exposed
Reverse SMA connectors on both sides of the access point.
For non-diversity antennas, be sure to connect the single pigtail cable to the
Reverse SMA connector on the access point's side activated through the
software interface.
Installation Procedures
3
3-3