SMC Networks EliteConnect SMC2555W-AG2 User Manual page 143

6
System Configuration
CLI Commands for Displaying the Logging Status – From the global configuration
mode, use the show logging command.
Enterprise AP#show loggging
Logging Information
============================================
Syslog State
Logging Console State
Logging Level
Logging Facility Type
Servers
1: 192.168.1.19, UDP Port: 514, State: Enabled
2: 0.0.0.0, UDP Port: 514, State: Disabled
3: 0.0.0.0, UDP Port: 514, State: Disabled
4: 0.0.0.0, UDP Port: 514, State: Disabled
=============================================
Enterprise AP#
CLI Commands for Displaying Event Logs – To view the access point log entries,
use the show event-log command from the Exec mode. To clear all log entries from
the access point, use the logging clear command from the Global Configuration
mode.
Enterprise AP#show event-log
Mar 09 11:57:55
Mar 09 11:57:55
Mar 09 11:57:34
Mar 09 11:57:18
Mar 09 11:56:35
Mar 09 11:55:52
Mar 09 11:55:52
Mar 09 11:55:52
Mar 09 11:55:40
Mar 09 11:55:40
Press <n> next. <p> previous. <a> abort. <y> continue to end :
Enterprise AP#configure
Enter configuration commands, one per line. End with CTRL/Z
Enterprise AP(config)#logging clear
Enterprise AP#
6-92
: Enabled
: Enabled
: Alert
: 16
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11g:Radio channel updated to 8
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11g:11g Radio Interface Enabled
Information: 802.11a:11a Radio Interface Enabled
Information: SSH task: Set SSH server port to 22
Information: SSH task: Enable SSH server.
Information: Enable Telnet.
Information: 802.11a:11a Radio Interface Disabled
Information: 802.11a:Transmit Power set to QUARTER
7-32
7-33
7-32