Command Line Processing; Command Groups - SMC Networks EliteConnect SMC2555W-AG2 User Manual

7
Command Line Interface

Command Line Processing

Commands are not case sensitive. You can abbreviate commands and parameters
as long as they contain enough letters to differentiate them from any other currently
available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the "?" character to display a list
of possible matches. You can also use the following editing keystrokes for
command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or
backspace key

Command Groups

The system commands can be broken down into the functional groups shown below.
Command Group
General
System Management Controls user name, password, web browser management options, and
System Logging
System Clock
DHCP Relay
7-6
Table 7-1. Keystroke Commands
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates a task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes from cursor to the end of the command line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Shows the last command.
Repeats current command line on a new line.
Deletes the entire line.
Deletes the last word typed.
Moves the cursor backward one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
Table 7-2. Command Groups
Description
Basic commands for entering configuration mode, restarting the system,
or quitting the CLI
a variety of other system information
Configures system logging parameters
Configures SNTP and system clock settings
Configures the access point to send DHCP requests from clients to
specified servers
Page
7-7
7-12
7-29
7-34
7-39