SMC Networks EliteConnect SMC2555W-AG2 User Manual page 61

6
System Configuration
CLI Commands for RADIUS – From the global configuration mode, use the
radius-server address command to specify the address of the primary or
secondary RADIUS servers. (The following example configures the settings for the
primary RADIUS server.) Configure the other parameters for the RADIUS server.
Then use the show show radius command from the Exec mode to display the
current settings for the primary and secondary RADIUS servers.
Enterprise AP(config)#radius-server address 192.168.1.25
Enterprise AP(config)#radius-server port 181
Enterprise AP(config)#radius-server key green
Enterprise AP(config)#radius-server timeout 10
Enterprise AP(config)#radius-server retransmit 5
Enterprise AP(config)#radius-server port-accounting 1813
Enterprise AP(config)#radius-server timeout-interim 500
Enterprise AP(config)#exit
Enterprise AP#show radius
Radius Server Information
========================================
IP
Port
Key
Retransmit
Timeout
Radius MAC format
Radius VLAN format : HEX
========================================
Radius Secondary Server Information
========================================
IP
Port
Key
Retransmit
Timeout
Radius MAC format
Radius VLAN format : HEX
========================================
Enterprise AP#
6-10
: 192.168.1.25
: 181
: *****
: 5
: 10
: no-delimiter
: 0.0.0.0
: 1812
: *****
: 3
: 5
: no-delimiter
7-59
7-60
7-60
7-61
7-61
7-62
7-62
7-64