SMC Networks EliteConnect SMC2555W-AG2 User Manual page 81

6
System Configuration
Setting the Timeout Interval
You can set the timeout interval for web access to the unit, after which the user will
have to re-enter the username and password.
Session Timeout for WEB – Sets the time limit for an idle web interface session.
(Range: 0-1800 seconds; Default: 300 seconds; 0 is disabled)
This parameter cannot be configured through the CLI interface.
Upgrading Firmware
You can upgrade new access point software from a local file on the management
workstation, or from an FTP or TFTP server. New software may be provided
periodically from your distributor.
After upgrading new software, you must reboot the access point to implement the
new code. Until a reboot occurs, the access point will continue to run the software it
was using before the upgrade started. Also note that new software that is
incompatible with the current configuration automatically restores the access point to
the factory default settings when first activated after a reboot.
6-30