System Configuration - SMC Networks EliteConnect SMC2555W-AG2 User Manual

6

System Configuration

CLI Commands for System Identification – Enter the global configuration mode, and
use the system name command to specify a new system name. Then return to the
Exec mode, and use the show system command to display the changes to the
system identification settings.
Enterprise AP#config
Enterprise AP(config)#system name R&D
Enterprise AP(config)#end
Enterprise AP#show system
Enterprise AP#config
Enter configuration commands, one per line.
Enterprise AP(config)#system name R&D
Enterprise AP(config)#end
Enterprise AP#show system
System Information
==============================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
MAC Address
Radio A MAC Address
Radio G MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Management VLAN ID(AP): 1
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTPS Server
HTTPS Server Port
Slot Status
Boot Rom Version
Software Version
SSH Server
SSH Server Port
Telnet Server
WEB Redirect
DHCP Relay
==============================================================
Enterprise AP#
6-4
:
: 0 days, 0 hours, 32 minutes, 22 seconds
: R&D
:
: Contact
: US - UNITED STATES
: 00-12-CF-12-34-60
: 00-12-CF-12-34-61
: 00-12-CF-12-34-65
: 192.168.1.1
: 255.255.255.0
: 0.0.0.0
: DISABLED
: ENABLED
: ENABLED
: ENABLED
: 80
: ENABLED
: 443
: Dual band(a/g)
: v1.1.5
: v4.3.2.0b01
: ENABLED
: 22
: ENABLED
: DISABLED
: DISABLED
7-14
7-88
7-23
7-8
7-14
7-88
7-23