Table of Contents
Advertisement
6
System Configuration
• 802.1X Reauthentication Refresh Rate: The time period after which a connected
client must be re-authenticated. During the re-authentication process of verifying
the client's credentials on the RADIUS server, the client remains connected the
network. Only if re-authentication fails is network access blocked. (Range: 0-65535
seconds; Default: 0 means disabled)
CLI Commands for 802.1X Authentication – Use the 802.1X supported command
from the VAP interface mode to enable 802.1X authentication. Set the session and
broadcast key refresh rate, and the re-authentication timeout. To display the current
settings, use the show interface wireless command from the Exec mode (not
shown in the example).
SMC AP(if-wireless g: VAP[0])#802.1X supported
SMC AP(if-wireless g: VAP[0])#802.1X broadcast-key-refresh-rate 5
SMC AP(if-wireless g: VAP[0])#802.1X
session-key-refresh-rate 5
SMC AP(if-wireless g: VAP[0])#802.1X session-timeout 300
SMC AP#
Status Information
The Status page includes information on the following items:
Menu
AP Status
Station Status
Event Logs
Access Point Status
The AP Status window displays basic system configuration settings, as well as the
settings for the wireless interface.
6-88
Description
Displays configuration settings for the basic system and the
wireless interface
Shows the wireless clients currently associated with the access
point
Shows log messages stored in memory
7-66
7-67
7-68
7-68
Page
6-88
6-91
6-93
Advertisement
Table of Contents
