Saving Insert Effect Settings - Boss BR-1200CD Owner's Manual

Using insert effects

Saving insert effect settings

Modified effect settings are saved by writing them together
with a new patch name.
1. Press [F1] (NAME) on the Effects Edit screen.
fig.31-05d
2. Move the cursor to the characters in the patch name you
want to change and select new characters using the
TIME/VALUE dial.
At this time, the FUNCTION buttons operate as follows.
[F1] (INSERT):
An empty space of one character in length will be
inserted.
[F2] (DELETE):
A single character will be deleted.
[F3] (A<=>a):
The character type will toggle between uppercase and
lowercase.
3. Press [EXIT/NO] twice to return to the Effects Edit
screen.
4. Press [F3] (WRITE•COPY).
The Effects Patch Write/Copy screen will appear.
fig.31-06d
5. Move the cursor to the destination patch number and
select a destination patch using the TIME/VALUE dial.
fig.31-07d
Note that you can also move the cursor to the bank field
and turn the TIME/VALUE dial to select a new
destination bank.
122
This field should be left unchanged at
"*TMP(CURRENT)" If a different message is displayed,
however, move the cursor to this field and turn the
TIME/VALUE dial counterclockwise to restore
"*TMP(CURRENT)."
TO:
This field sets the effect patch to which your new settings
are to be written. Whenever you call up the Effects Patch
Write/Copy screen, the cursor will be automatically
positioned here. Note that you can also move the cursor
to the bank field and turn the TIME/VALUE dial to
select a new destination bank.
6. Press [F3] (GO).
The effect patch will be written. When finished, the
message "Complete!" will appear and the display will
automatically return to the Effects Patch screen.
If you selected a different destination bank than that
specified with the INPUT SELECT button, this new bank
selection will be maintained after writing has been
completed.
7. Press [EXIT/NO] several times to return to the top
screen.