Cleaning And Storage Of The Water Bottle Assembly; Storage - Pentax EPK-i7010 Instructions For Use Manual

 If the processor is turned off prior to turning off any connected peripheral devices, it may result in malfunction of the
peripheral devices.
 Make sure that no water spills on the processor when you perform the aftercare procedure. In particular, getting water
into the connector parts and air intake vents may result in malfunction in the processor.
Observe the following points when storing the processor.
• Be sure to turn off the processor and disconnect the power plug prior to storage.
• Do not store the processor in a location with high temperature and humidity or a location where the processor could get
wet or be exposed to direct sunlight.
• Store the processor in a location where dust does not enter inside the processor. Wipe off any dust on the processor.
Excessive amount of dust accumulation inside the processor may result in malfunction in the processor, smoke or fire
from the processor.
• Be careful not to drop the processor or subject it to an excessive mechanical shock. The processor may become unsafe
to use or damaged. If the processor is subjected to an excessive mechanical shock, stop using it and contact your
PENTAX Medical service facility.

Cleaning and Storage of the Water Bottle Assembly

When washing, disinfecting, and sterilizing the water bottle assembly, be sure to follow the instructions in the IFU for OS-H5.

Storage

Observe the following points on storage
• Be sure to turn off the processor and disconnect the power plug prior to storage.
• Do not store the processor in a very hot and humid location, or where it is likely to be exposed to water or direct sunlight.
WARNING
 Store the processor in a location where dust will not enter inside the unit. Wipe off any dust on the processor.
6
Furthermore, when storing the processor for a long term, take precautions to reduce dust build up within the
processor. Excessive amount of dust accumulation inside the unit may cause the processor to malfunction, emit
smoke, or catch fire.
 Do NOT store the unit in direct sunlight or where temperature and humidity are high or where it can be exposed to
liquids.
Be careful not to drop the processor or subject it to an excessive mechanical shock. The processor may become unsafe
to use or damaged. If the processor is subjected to an excessive mechanical shock, stop using it and contact our service
personnel.
81
Maintenance