Water Bottle Assembly - Pentax EPK-700 Owner's Manual

3-2 WATER BOTTLE ASSEMBLY

No. NAME
1 Bottle
2 Water Bottle Cap Assembly
3 Air Pipe Stem
4 Air/Water Hose
5 Air/Water Connector
6 Air/Water- Drain Lever
7 Water Feeding Stem
- If the water bottle assembly has been handled roughly, the water feeding tube inside the Air/Water hose may be
NOTE
disconnected at the A/W connector for the endoscope. To test, remove the cap assembly and using a syringe, inject water into the
water feeding stem. If the water comes out of both the center hole of the A/W connector and the series of holes around the center
hole, the water feeding tube is disconnected. Use another water bottle assembly.
3
2
1
FUNCTION
Holds sterile water for procedure. (use up to 2/3's full)
Must be firmly secured to bottle to prevent air leakage.
Inserts into video processor water bottle receptacle.
Contains (2) independent tubes - 1 for air, 1 for water.
Inserts into Air/Water socket of endoscope umbilical connector.
Must be set to upright (A/W) position for delivery of air and water.
Channel for water to be displaced from bottle and into scope.
6
7
11
4
5