Pentax EPK-i7010 Instructions For Use Manual page 67

 Option (Still image)
Set options related to saving still images.
1
Press [>] of [Option] in the [File storage settings (Still
image)] screen.
• The [Option (Still image)] screen appears.
2
Set each of the items.
• [File format]
Select the setting for the format and compression rate for
saving files from [BMP], [JPEG High quality], and [JPEG
Standard quality].
• [Add external.] check box
Add a check mark to save endoscopic images and external
input images as one file while external input images are
displayed in P-in-P mode.
• [Add patient information.] check box
Add a check mark to save the patient's name, ID, and other
patient information together with still images.
• [Add image processing parameter information.] check box
Add a check mark to save the SE, CE, and other image
processing parameter information together with still images.
NOTE
 Since lossy compression is used for JPEG images, it may result in the loss of details in images.
 Please make sure to check the JPEG image quality prior to use if it is stored in JPEG format.
 When the setting allows for simultaneous saving of endoscopic image and the external input image in a single file,
the file containing both image (endoscopic image and external input image) will be saved in peripheral device also.
(The peripheral device must be specified under "Add external." menu)
 While still image data remains in the processor during the process of capturing to a USB printer or saving to Image
Recording Media, a white "○" is displayed on the bottom right of the monitor. Do not disconnect the USB printer or
Image Recording Media or turn off the processor until the "○" disappears.
 Please try not to execute the next capture until the "○" disappears.
 When trying to capture an image while system is processing the image at the same time, wait for the endoscopic
image on the LCD monitor to be switched before proceeding to capture the next image.
 When the Twin mode setup is made after freezing, an image processing is not reflected in the left side screen. In the
case where the USB capture is performed as is, an image-processing parametric information is added to the still
picture even if not checking [Add image processing parameter information.]of [Option (Still image)]. And the image-
processing parametric information of the left side screen displays "-". Image processing of the left side screen will
become effective after freezing release.
 File storage settings (Video image)
Set the method to save video images.
1
Press [>].
• The [File storage setting (Video image)] screen appears.
2
Configure the settings of [Select drive], [Folder and
file name], [Disk space warning], and [Option].
Press any of the buttons to configure the
setting.
Press a check box to add or clear a check
mark.
Display the advanced settings screen.
Operating Procedure
5
62