Pentax EPK-i7010 Instructions For Use Manual page 29

NOTE
 You can change the display for the HD monitor and the SD monitor in [Display setting]. I"Display setting" (P.66)
 Depending on the setting of the monitor screen, endoscopic image or text information might spill out of the screen. Adjust the display
position by performing overscan/underscan adjustment or vertical/horizontal adjustment and make sure that the image as well as
text is correctly displayed on the screen.
 Displayed/undisplayed of each item can be set up by [Character display]. I"Settings in the [User data edit No.*] Screen" (P.78)
 Freeze Screen P-in-P Mode Screen
When the freeze function is executed, the monitor display is split into a main screen and sub screen, and still images are
displayed in the main screen and endoscope video images are displayed in the sub screen.
When images are input from an external device, you can continue to display the endoscope video images in the main screen
and display the images input from the external device in the sub screen. (P-in-P mode)
HD Monitor Display
Be sure to check that the endoscopic images on the monitor are not static and that the images are displayed with the
correct orientation each time before attempting to use the equipment or after changing the image mode from freeze
screen to normal screen or twin mode screen.
NOTE
If you set the [Sub screen position] to [Upper Right] on an SD monitor, [Date] and [Time] will be hidden.
 Twin Mode Screen
This screen displays two endoscope video images together. It enables you to confirm an image for which image processing
has been performed and an unprocessed image at the same time.
HD Monitor Display
SD Monitor Display
SD Monitor Display
Operating Procedure
5
24