Pentax EPK-i7010 Instructions For Use Manual page 57

 Character display
Set character display for the monitor.
[Off] All characters are not displayed.
[Date/Time] Only the date and time are displayed.
[On] The information set to [ON] in [Character display] of the keyboard menu is displayed.
1
Select [Off], [Date/Time], or [On].
 Shutter setting
Configure the shutter speed settings of the endoscope.
1
Press [>].
• The [Shutter setting] screen appears.
2
Configure the settings of [K series scope] or [i series
scope].
 K series scope
Set whether or not to automatically change the shutter speed of a K
series endoscope when capturing normal images and close-up images.
"K series" consists of 70K, 80K, 90K, K10 and J10 series.
[Off] The shutter speed is not changed. Select [Off] when using an
external light source.
[On] The shutter speed is changed. When capturing close-up
images, this enables clear images to be obtained if sufficient
amount of light is emitted from the lamp.
1
Press [Off] or [On].
 i series scope
Set whether or not to automatically change the shutter speed of an i series endoscope when capturing normal images and
close-up images.
[Off] The shutter speed is not changed. Select [Off] when using an external light source.
[Low] The shutter speed is changed in low speed mode. Select [Low] if limited amount of light is emitted from the lamp
when capturing close-up images.
[Medium] The shutter speed is changed in medium speed mode. When capturing close-up images, this enables clear
images to be obtained if sufficient amount of light is emitted from the lamp.
[High] The shutter speed is changed in high speed mode. When capturing close-up images, this enables the clearest
images to be obtained if sufficient amount of light is emitted from the lamp.
1
Select [Off], [Low], [Medium], or [High].
NOTE
When turned off the lamp, the shutter speed is not changed.
Press any of the buttons to configure the
setting.
Operating Procedure
5
52