Pentax EPK-i7010 Instructions For Use Manual page 50

3
Press the button of the function to set.
• You can press W X to display additional functions.
• The name of the assigned function is displayed below the
customize button.
The following functions can be assigned.
Function Name
SE
CE
5
TE
OE*
i-scan1*
i-scan2*
i-scan3*
i-scan Off-1-2-3*
i-scan profile
Remote1*
Remote2*
Remote3*
Freeze*
45
Operating Procedure
Function Description
Switch the SE level to a level available in [SE setting]. It cannot be
processed simultaneously with [OE] or the structure enhancement mode
[a1 to a6].
Switch the CE level to a level available in [CE setting]. It cannot be
processed simultaneously with [OE].
Switch the TE mode to a mode available in [TE setting]. It cannot be
processed simultaneously with [OE].
Switch the OE mode to a mode available in [OE setting]. It cannot be
processed simultaneously with [SE] [CE] [TE].
Use the settings of [i-scan1]. When the function is configured, a check
mark is displayed in the check box of the corresponding button.
Use the settings of [i-scan2]. When the function is configured, a check
mark is displayed in the check box of the corresponding button.
Use the settings of [i-scan3]. When the function is configured, a check
mark is displayed in the check box of the corresponding button.
Switch the i-scan mode between [Off], [i-scan1], [i-scan2], and [i-scan3].
Open the i-scan profile menu.
Output a signal from the REMOTE1 connector on the back of the
processor.
Output a signal from the REMOTE2 connector on the back of the
processor.
Output a signal from the REMOTE3 connector on the back of the
processor.
Switch between video mode and freeze mode.
Assignable Functions
Display additional functions.
Reference
Page
P.55
P.56
P.56
P.56
P.37
P.37
P.37
P.38
P.37
—
—
—
—