Pentax EPK-i7010 Instructions For Use Manual page 58

 Sub screen setting
Configure the settings for the sub screen displayed when, for example, the freeze function is executed.
1
Press [>].
• The [Sub screen setting] screen appears.
2
Configure the [Sub screen delay], [Sub screen
position], and [Sub screen position (ERCP)] settings.
 Sub screen delay
Set the display of the sub screen to be delayed.
[Off] The sub screen is displayed immediately after the freeze
function is executed.
[On] The sub screen is displayed shortly after the freeze function is
executed.
1
Press [Off] or [On].
 Sub screen position
Set the position to display the sub screen.
[Upper Left] Display the sub screen on the upper left of the monitor.
[Upper Right] Display the sub screen on the upper right of the monitor.
1
Press [Upper left] or [Upper right].
 Sub screen position (ERCP)
When using a side viewing endoscope (ED series), set the position to display the sub screen.
5
[Upper Left] Display the sub screen on the upper left of the monitor.
[Upper Right] Display the sub screen on the upper right of the monitor.
1
Press [Upper left] or [Upper right].
NOTE
The [Sub screen position] and [Sub screen position (ERCP)] settings are enabled only on SD monitor displays.
53
Operating Procedure
Press any of the buttons to configure the
setting.