Pentax EPK-i7010 Instructions For Use Manual page 34

XLUM ON/OFF Button
Use this button when you want to know the position of the distal end of the endoscope from outside the body. When this is set
to on, the light intensity of the endoscope is set to maximum and you can confirm the position of the distal end of the endoscope
from outside the body.
1
d
Press on the touch panel.
• When this is turned on, [ON] of the button illuminates green and the [BRIGHTNESS] indicator indicates the Maximum
value.
• Press the button again to turn it off.
 Do not use the XLUM ON function during routine use.
 When XLUM is used, Brightness cannot be adjusted.
 XLUM is the function that enables the physician to locate the distal end of the endoscope within the patient's body by
intensifying the light emitted by the endoscope to its maximum level. However, the effectiveness of XLUM function
can be limited by such factors as patient's body size and so on.
Off Off
Scope Enhance
SE
eject -ment
Pressing a customize button activates the function assigned to it. Depending on the registered function, you may be able to
change, for example, the setting value by just pressing the button repeatedly or you may be able to display the setting screen
for that function by just pressing the button once.
5
You can change the functions set for the customize buttons in [Customize button settings] on the [Customize] tab of the Setup
menu.
I "Customize button settings" (P.44)
1
Press the desired customize button.
• The setting value changes or the screen for setting the function appears.
Pressing the Setup button displays the menu for configuring the settings of each of [i-scan], [Image], [Customize], [System],
and [Peripheral].
1
Press e on the touch panel.
• The Setup menu appears.
I"Setup Menu Operations" (P.35)
29
Operating Procedure
+2
Customize Buttons
CE
Setup Button