Pentax EPK-i7010 Instructions For Use Manual page 52

Function Name
Stopwatch
System information
Shutter mode*
Copy*
Video*
PC capture*
D-range expansion
Manual brightness level
5
iDoc button
Cecum marker
*: The button does not function when an endoscope is not connected to the processor.
47
Operating Procedure
Function Description
Start or stop the stopwatch. Press and hold the button to reset the
stopwatch.
Display the [System information] screen.
Switch the shutter mode for the endoscope between [Off] and [On] (K
series endoscope) or between [Off], [Low], [Medium], and [High] (i series
endoscope).
Capture a still image and output it to the Endonet system or endoPRO.
Start/stop recording video to the Endonet system or endoPRO.
Output the image to PC via Endoimage2.
Switch the level for D-range expansion between [Off], [Low], [Medium],
and [High].
Set the brightness adjustment level by endoscope type while [MANUAL]
is set for [EXPOSURE CONTROL].
Send the current settings for i-Doc management to endoPRO.
Send a command for the Cecum marker to endoPRO.
Reference
Page
P.66
P.68
P.52
—
—
—
P.43
P.67
—
—