Pentax EPK-i7010 Instructions For Use Manual page 66

 Folder and file name (Still image)
Set the names of the folders and files generated in the PENTAX folder of the "Image Recording Media" (P.91) when still images
are saved.
1
Press [>] of [Folder and file name] in the [File storage
settings (Still image)] screen.
• The [Folder and file name (Still image)] screen appears.
2
Select [Name], [ID], or [Date] of [Current folder] to set
the name.
3
Press [Name] or [ID] of [File name] to switch it on or
off.
• Each press of a button switches the name on or off.
• In addition to [Name] or [ID], a consecutive number is
automatically added to a file name. A four-digit number is added
when either [Name] or [ID] is on, and an eight-digit number when
both of them are off.
 Disk space warning (Still image)
Set the threshold for displaying the "Image Recording Media" (P.91) free space warning message.
1
Press [>] of [Disk space warning] in the [File storage
settings (Still image)] screen.
• The [Disk space warning (Still image)] screen appears.
2
Set the threshold value for displaying a warning
5
message by pressing the number buttons.
• You can set a value within the range of 10 to 65,535.
• Pressing [Clear] resets the value to 0.
3
Press [OK].
• If you switch to another screen without pressing the [OK] button,
the settings will not be applied.
• If the free space of the Image Recording Media reaches the set
value, the message "Check memory space (Still image)."
appears on the monitor.
61
Operating Procedure
The current folder and file name settings
are displayed in a folder tree.
Set the folder and file names.
Set the value for which to display a
warning message.
Reset the setting value.
Confirm the setting.