Operations in the [User list preset] Tab
Registering New and Editing Existing User Data
Display the user preset list. Then, register new user data or edit registered user data. You can register the following user data
items: [User name], [Character display], [Assign scope buttons & foot SW], [Picture data], and [Picture data initialize].
1
Press the [] or [] key in the keyboard menu screen to select the [User list preset] tab.
• The [User list preset] screen (registration numbers 1 to 10) appears.
2
Press the [] or [] key to select a user. To register a
new user, select [New] or a number with no user
registered. To edit existing user data, select the
corresponding user.
• To change the page of the user list, press the [] or [] key to align
the cursor with [Page */*] and then press [] or [].
• To delete the selected user data, Press the [Backspace] or [Delete]
key. Pressing each key display the deletion confirmation message.
Select [Yes] or [No] and press the [Enter] key. If you select [Yes],
the selected user data is deleted from the user list.
• To delete all user data, press the [Clear] key. Pressing the key
displays the deletion confirmation message. Select [Yes] or [No]
and press the [Enter] key. The deletion confirmation message appears again. If you select [Yes] again, all user data
is deleted from the user list.
3
Press the [] key.
5
• The [User data edit No.*] screen appears.
• Follow the procedure below to enter or change data in the [User
data edit No.*] screen.
1 Press the [] or [] key to select an item.
2 Press the [] key. The corresponding setup screen appears.
3 Press the alphanumeric keys to enter or change data. Press the
[], [], [], and [] keys to select items and configure the
settings.
4 Press the [Enter] or [Esc] key. The [User list preset] screen
reappears.
Pressing the [Enter] key reflects any data entered and changes
made and pressing the [Esc] key discards any data entered and changes made.
4
To enter or change other data, press the [] or [] key to select a user and repeat Step 3.
5
Press the [Enter] or [Esc] key.
• The normal screen reappears.
• Press the [Enter] key to return to the normal screen where the information of the user selected in the [User list preset]
screen is displayed.
• Press the [Esc] key to return to the normal screen displayed prior to the [User list preset] screen.
77
Operating Procedure
[User list preset] Screen
[User data edit No.* ] Screen