Kyocera 3508ci Operation Manual page 468

Setup and Registration (System Menu) > System Menu
Item
Optional Interface 1
Optional Interface 2
Restart Entire Device
Device Security Settings
[Home] key > [...] > [System Menu] > [Security Settings] > "Device Security Settings"
Item
*1
Unusable Time
Job Status/Job Logs
Settings
Security Level
Remote Printing
Software Verification
Administrator
Authentication on
Firm Update
*1 Displayed only when the optional FAX Kit is installed.
This locks and protects the optional interface slots.
Value: Unblock, Block
NOTE
You can set this feature for each slot.
Restart the machine without turning the power switch off.
IMPORTANT
After changing "Interface Block Setting", restart the network or turn the machine OFF
and then ON.
Set a time period during which the machine will not print received faxes.
FAX Operation Guide
Job Status/Job Logs Settings (page 8-50)
Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
NOTE
This function is available when you have logged in as machine administrator.
Adding a User (Local User List) (page 9-6)
Remote Printing (page 8-48)
Verify the installed software.
Select [Start] to start verification.
If an error occurs during software verification, contact your dealer or service representative.
Request administrator to approve when updating firmware.
Value: Off, On
Description
Description
8-71