Original Size - Kyocera 3508ci Operation Manual

Using Various Functions > Functions

Original Size

Org./Paper
Copy
/Finishing
Specify the original size to be scanned.
Select [Auto (Document Processor)], [Metric], [Inch], [Others] or [Size Entry] to select the original size.
Item
Auto —
(Document
Processor)
Metric A3, A4-R, A4, A5-R, A5, A6, B4, B5-R, B5,
B6-R, B6, Folio, 216 x 340 mm
Inch Ledger, Letter-R, Letter, Legal, Statement-R,
Statement, 11" × 15", Oficio II
Others 8K, 16K-R, 16K, Hagaki (Cardstock),
Oufukuhagaki (Return postcard), Custom 1-4
Size Entry Metric
X: 50 to 432 mm (in 1 mm increments)
Y: 50 to 297 mm (in 1 mm increments)
Inch
X: 2.00 to 17.00" (in 0.01" increments)
Y: 2.00 to 11.69" (in 0.01" increments)
*1 For instructions on how to specify the custom original size, refer to the following:
Custom Original Size (page 8-12)
*2 The input units can be changed in System Menu. For details, refer to the following:
Measurement (page 8-6)
NOTE
Be sure to always specify the original size when using custom size original.
Org./Sending
Send
Data Format
Value
Functions
Custom
Box
Have the size of original detected automatically.
Select from the Metric series standard sizes.
Select from the Inch series standard sizes.
Select from special standard sizes and custom
*1
sizes.
Enter the size not included in the standard
*2
sizes.
When you have selected [Size Entry], select [+]
or [-] to set the sizes of "X" (horizontal) and "Y"
(vertical). Select the entry field to use the
numeric keys for entry.
6-20
Functions
USB
Drive
Description