Kyocera 3508ci Operation Manual page 129

Installing and Setting up the Machine > Embedded Web Server RX
3
4
Setting
SMTP
SMTP Protocol
SMTP Server Name
SMTP Port Number
SMTP Server Timeout
Authentication
Protocol
SMTP Security
Connection Test
Domain Restriction
Display the screen.
Display the E-mail Settings screen.
From the [Function Settings] menu, click [E-mail].
1
2
Configure the settings.
Enter "SMTP" and "E-mail Send Settings" items.
Set to send e-mail from the machine.
Displays the SMTP protocol settings. Check that "SMTP Protocol" is set to
[On]. If [Off] is set, click [Protocol] and set the SMTP protocol to [On].
*1
Enter the host name or IP address of the SMTP server.
Specify the port number to be used for SMTP. The default port number is 25.
Set the amount of time to wait before time-out in seconds.
To use SMTP authentication, enter the user information for authentication.
Set SMTP security.
Turn on "SMTP Security" in "SMTP (E-mail TX)" on the
[Protocol Settings] page.
Tests to confirm that the E-mail function is operating under the settings without
sending a mail.
To restrict the domains, click the [Domain List] and enter the domain names of
addresses to be allowed or rejected. Restriction can also be specified by e-mail
address.
Description
2-65