Kyocera 3508ci Operation Manual page 344

Using Various Functions > Functions
Item
Book >> Binding in Original
*2
Booklet
Binding in Finishing
Cover
Staple/Fold
*1 This function can only be used when the optional OCR Scan Activation Kit is installed.
*2 [Top Edge on Top] is set for "Original Orientation".
Printing
Item
Off
Booklet Binding
Cover
Staple/Fold
NOTE
• The number of sheets that can be folded or Saddle Stitch stapled varies depending on paper weight. For details,
refer to the following:
Folding Unit (For 4,000-sheet Finisher) (page 11-32)
• When placing the original on the platen, be sure to place the originals in page order.
Left, Right
Left, Right
Off, On
Off, Fold Only,
Saddle Stitch
Left, Right, Top
Off
Cover: Do Not Print,
Front Only,
Front Cover
Back Only, Duplex
Print Setting
Cover: Do Not Print,
Front Only,
Back Cover
Back Only, Duplex
Print Setting
Off, Fold Only,
Saddle Stitch
6-58
Value
Select the binding direction of originals.
Select the binding orientation of copies.
Select whether to add the cover. Select
[Cover] to select [Cover], and select [OK].
To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
Value
Select the binding orientation of copies.
Select whether to add the cover. Select the
printing method for the cover to be
inserted.
Select [Cover], and then [Cover], and
specify the print setting for the cover to be
inserted. Select from [Not Print], [Back
Only], [Front Only], and [Duplex], and
press [OK].
To fold finished copies in half, select
[Staple/Fold] and then select [Fold Only].
To use saddle stitching, select [Staple/
Fold] and then select [Saddle Stitch].
Description
Description