Kyocera 3508ci Operation Manual page 103

Installing and Setting up the Machine > Network Setup
6
Configuring the Connection by Using Push Button
When your computer or handheld device does not support Wi-Fi Direct but supports WPS, you can configure the
network using push button.
1
2
3
4
5
IMPORTANT
You can connect up to ten handheld devices at the same time using Wi-Fi Direct setting. When the devices
that support Wi-Fi Direct are connected, if you want to connect other device, disconnect the already-
connected devices from the network. The disconnection methods are as follows:
• Disconnect the network from the computer or handheld computer
• Disconnecting all devices from the network on the operation panel
Select [Home] key > [Device Information] > [Wi-Fi] > "Wi-Fi Direct" [Device] > [Disconnect] > [Disconnect]
• Configuring auto disconnecting time from the System menu
Wi-Fi Direct Settings (page 8-52)
• Configuring auto disconnecting time from the Embedded Web Server RX
Embedded Web Server RX User Guide
Configure the handheld device.
1
[Settings] > [Wi-Fi]
2
Select the network name (SSID) appeared in step 5 from the list.
3
Enter the password that was provided in step 5 > [Connect]
The network between this machine and the handheld device is configured.
Display the screen.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Wi-Fi Direct
Settings]
Configure the settings.
"Wi-Fi Direct": [On] > [OK]
Restart the network.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Restart
Network] > [Restart]
[Home] key > [Device Information] > [Wi-Fi]
Press the push button on the computer or handheld device and
select "Wi-Fi Direct" [Push Button Setup] > [OK] on the screen
of operation panel.
The network between this machine and the computer or handheld device is configured.
2-39