Apply Limit - Kyocera 3508ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Apply Limit

Apply Limit

This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1
2
Item
*1
Immediately
Subsequently
Alert Only
*1 The next job will be prohibited in sending or in storing in the box.
Display the screen.
1
[Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Login User Name: 2508ci: 2500, 3508ci: 3500
Login Password: 2508ci: 2500, 3508ci: 3500
2
"Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only].
Job stops when the counter reaches its limit.
Printing/scanning of the job continues but the subsequent job will
be rejected.
Job continues while displaying an alert message.
9-50
Descriptions