Setting Wi-Fi Direct - Kyocera 3508ci Operation Manual

Installing and Setting up the Machine > Network Setup

Setting Wi-Fi Direct

Setting Wi-Fi Direct enables you to print from the Wi-Fi Direct environment. The configuration methods are as follows:
NOTE
To use Wi-Fi Direct, Wireless Network Interface Kit (IB-37 or IB-38) must be installed in the machine.
IB-37/IB-38 "Wireless Network Interface Kit" (page 11-6)
Configuring the Connection from the Operation Panel on This Machine
Connecting to Computers or Handheld Devices that Support Wi-Fi Direct
1
2
3
4
Connecting to Computers or Handheld Devices Unsupported Wi-Fi Direct
Here, we'll explain the procedures for connecting to iOS handheld devices.
1
2
3
4
5
Display the screen.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Wi-Fi Direct
Settings]
Configure the settings.
"Wi-Fi Direct": [On] > [OK]
Restart the network.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Restart
Network] > [Restart]
Specify the machine name from the computer or handheld
device.
If a confirmation message appears on the operation panel of the machine, select [Yes].
The network between this machine and the handheld device is configured.
Display the screen.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Wi-Fi Direct
Settings]
Configure the settings.
"Wi-Fi Direct": [On] > [OK]
Restart the network.
[Home] key > [...] > [System Menu] > [Network Settings] > "Network Settings" [Restart
Network] > [Restart]
[Home] key > [Device Information] > [Wi-Fi]
Note the "Wi-Fi Direct" network name (SSID), IP address, and
password.
2-38