Kyocera 3508ci Operation Manual page 462

Setup and Registration (System Menu) > System Menu
Optional Network
[Home] key > [...] > [System Menu] > [Network Settings] > "Optional Network"
Configure settings for the optional Network Interface Kit.
NOTE
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
Host Name
Item
Host Name
Wireless Network
Configure settings for the optional Wireless Network Interface Kit.
NOTE
This function is displayed when the Wireless Network Interface Kit (IB-51) is installed.
Item
Connection Status
Setup Available Network
Push Button Method
PIN Code Method
(Device)
PIN Code Method
(Terminal)
Check the host name of the machine. Host name can be changed from Embedded
Web Server RX.
Changing Device Information (page 2-62)
You can check the wireless LAN status.
Select access points to which the machine can be connected, enter the
Preshared Key and start a connection.
If the access point supports the push button method, wireless settings
can be configured using the push button. This setting executes push
button, and the connection is started by pressing the push button on the
access point.
NOTE
The push button method supports only the WPS.
Starts connection using the machine's PIN code. Enter the PIN code into
the access point. The PIN code of the machine is automatically
generated.
Starts connection using the PIN code of the access point. Enter the PIN
code of the access point.
8-65
Description
Description