Scanning With File Management Utility; Configuring Settings Before Sending; Using Fmu Connection To Scan An Original - Kyocera 3508ci Operation Manual

Operation on the Machine > Scanning with File Management Utility

Scanning with File Management Utility

"FMU Connection" is installed on the machine as a standard application.
FMU Connection can be used to scan an original according to the settings configured with "File Management Utility"
downloaded from our website, and save the image data and scanning information on a specified server or in a specified
folder. Unlike regular transmission functions, this application lets you use metadata such as the scan date and time and
the data format.

Configuring Settings before Sending

The first time you use FMU Connection, you must enable it in System Menu.
Add/Delete Application (page 8-82)
To use this function, you must install File Management Utility on your computer and configure settings for the
multifunction machine to be used, scanning conditions, and the file save location. To install File Management Utility, refer
to the following.
Installing Software (page 2-48)
NOTE
For information on using File Management Utility, refer to the following:
File Management Utility User Guide

Using FMU Connection to Scan an Original

1
2
3
4
5
6
Make sure that File Management Utility is running on the
computer (or server) on which File Management Utility is
installed.
Place the original.
Select [FMU Connection].
FMU Connection starts.
Follow the on-screen instructions to enter the necessary
information and select [Next].
When the scan settings screen appears, select each item and
configure the necessary settings.
The features that can be set depend on File Management Utility.
Press the [Start] key.
Sending starts.
5-39