Kyocera 3508ci Operation Manual page 463

Setup and Registration (System Menu) > System Menu
Item
Setup Custom Setup
TCP/IP Setting
Others
*1 Not displayed if you selected [Ad Hoc] for "Connection Mode".
*2 Not displayed if you selected [WPA2-PSK] for "Network Authentication".
The detailed settings for wireless LAN can be changed.
Network Name Set the SSID (Service Set Identifier) of the wireless LAN to which the
(SSID) machine connects.
Up to 32 characters can be entered.
Connection Set the connection mode.
Mode
Value: Ad Hoc, Infrastructure
• Ad Hoc: Directly communicates with the device without going
through an access point. This method cannot be used to connect to
two or more devices.
• Infrastructure: Performs communication through an access point.
Channel Set channel. Use [-] / [+] or the numeric keys to enter a number.
Value: 1 to 11
Network Select network authentication type. To select other options, open the
Authentication device home page from a computer.
Value: Open, Shared, WPA-PSK
Encryption Select encryption method. If the option other than [Disable] is selected,
enter the WEP key or the Preshared key. The setting values vary
depending on the Network Authentication setting. Select [Data
Encryption].
When Network Authentication is set to [Open] or [Shared]:
Value: Disable, WEP
When Network Authentication is set to [WPA-PSK] or [WPA2-PSK]:
Value: TKIP
• If [WEP] is selected, enter the WEP key. Up to 26 characters can be
entered.
• If [TKIP], [AES] or [Auto] is selected, enter the Preshared key. Enter
the value in 8 to 64 characters.
For details on setting value.
TCP/IP Setting (page 8-57)
Bonjour (page 8-63)
IPSec (page 8-64)
For details on setting value.
NetWare (page 8-67)
AppleTalk (page 8-67)
MAC Address Filter (page 8-67)
NOTE
NOTE
*2 *2
, AES, Auto , Preshared Key
NOTE
8-66
Description
*1 *1
, WPA2-PSK