Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Having the unit regularly
maintained
Checking cover seals on
the odour filter box
Maintaining cover seals
on odour filter box
Checking the castor
brakes
Cleaning the filter
cassettes
Maintenance
)
B.PRO recommends you have suitably trained Professional maintain the unit on a regular ba-
sis. Regular maintenance prevents the unit from breaking down, extends its operating life and
helps to retain its general value.
– Have suitably trained Professional maintain the unit on a regular basis.
Warning!
Live components
Live components may cause an electric shock if touched during maintenance work or when re-
placing parts on the connected unit.
– Switch off unit at the On/Off switch.
– Pull out the mains plug to disconnect the unit from the power supply.
)
The seals on the odour filter box must be checked regularly for damage.
– Check seals for damage (visual inspection).
– In case of damage, replace seal.
– Treat the seals regularly (monthly) with a commercial care agent to extend the seal service
life.
)
The castor brakes must be checked to ensure that they are effective every time the unit is mo-
ved to a new location.
– Lock castor brakes.
– Try to move the unit (do not use force!).
– If braking is inadequate, have the defective castor(s) replaced immediately by one of the
following:
– In-house, B.PRO-trained professionals
– External, B.PRO-trained customer service
– B.PRO service
)
The filter cassettes' cleaning intervals greatly depends on the unit's conditions of use.
B.PRO recommends cleaning the flame protection filter and wire mesh filter on a daily basis
and when odour filtering becomes less effective during normal operation. The filter cassettes
should be cleaned following a visual inspection and as needed after the inspection.
– Remove filter cassettes.
ª
Section "Cleaning the extraction bridge"
– Clean filter cassettes.
ª
Section "Cleaning the extraction bridge"
85
Advertisement
Table of Contents
