Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Cleaning the unit
70
Cleaning agents which are not suitable for the induction hob's glass ceramic surface:
•
All cleaning agents which may contain chlorides or hypochlorite, such as decalcifiers made
with hydrochloric acid, chlorine bleaches or similar
•
Abrasive cleaning agents
•
Damaged cleaning scrapers
Cleaning agents which are suitable for the optional eutectic plate:
•
Damp cloth, preferably a microfibre cleaning cloth, to clean after every use
•
Brush with synthetic or natural bristles for stubborn stains
•
Industrial dishwasher with a maximum of +90 °C (water and drying temperature)
•
Commercially available cleaning agents in an aqueous solution
Cleaning agents which are not suitable for the optional eutectic plate:
•
Stainless steel cleaning agents or other abrasive cleaning agents
•
Floor cloth
•
Solvent-based cleaning agents
•
All cleaning agents which may contain chlorides or hypochlorite, such as decalcifiers made
with hydrochloric acid or chlorine bleaches
•
Aggressive, corrosion-inducing cleaning agents/disinfectants, such as those based on fluori-
nated silicic acid, phosphoric acid or hydrochloric and sulphuric acid
•
Granule dishwasher
9
Unit is switched off
9
No external equipment connected
9
Mains plug disconnected from the socket outlet
9
Unit is cooled on inside and outside
Warning!
Danger of an electric shock due to water penetrating the housing
Water may penetrate into the housing when cleaning the connected unit and can cause a short
circuit or an electric shock.
– Switch off unit at the On/Off switch.
– Pull out the mains plug to disconnect the unit from the power supply.
B.PRO recommends:
As a basic rule, you should always test chemical cleaning agents on a hidden spot first to ensure
they are compatible with the surface. This will prevent any unwanted discolouration or other re-
actions between cleaners and the surface.
)
If mineral or even metallic dust needs to be removed during cleaning, you must continuously
rinse out cleaning utensils, such as brushes and microfibre cloths, to ensure that dust particles
leave no marks behind on the surface.
Advertisement
Table of Contents
