Moving The Unit To A New Location - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

Table of Contents

Advertisement

COOK I-flex
OPERATING INSTRUCTIONS
Moving the unit to a new
location
56
9
Unit is switched off
9
External devices switched off
9
Safety instructions on change of location read in the section on safety
Caution!
Injury and damage to property due to excessive speed
If you move the unit too fast, you may not be able to brake it in an emergency. The unit can tip
over and cause injuries and damage to property.
– Do not push the unit at a speed greater than 3 km/h.
– Push unit in such a way that you can brake whenever required.
– Two people should push the unit when the field of vision is limited, during complicated trans-
port manoeuvres and while traversing ramps, hollows and inclined surfaces.
– Pull out the mains plug.
ª
Chapter "Shutting down"
– Make sure that no objects which could fall are located on the induction hob, the storage
surfaces or the extraction bridge lid.
– Fold the optional tray slide downwards.
ª
Section "Folding down the attachment"
– Attach mains plug with cable to the unit to prevent the unit castors running over it.
Unit model with castors
1
– Release the castor brakes (1).
– Using both hands, carefully push the unit into position.
– Lock castor brakes (2).
2

Advertisement

Table of Contents
loading

Table of Contents