Ion Tec (Optional); Induction Hob - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS
The ION TEC functions based on the principle of electrostatic charging. The exhaust air to be

ION TEC (optional)

cleaned flows over electrically charged wires (ionisation wires). The particles contained in the ex-
haust air are positively charged in the process. The charged particles are then separated on the
collector plates thanks to the electrostatic affect during the downstream collector stage.
Liquid components in the separated particles, such as oil or emulsion droplets, flow down the
vertical collector plates and collect in the housing bottom well. The high-voltage field creates
ozone. The ozone generated oxidises odour particles in the air stream and is then absorbed on
the activated charcoal in the charcoal filter pad.
The energy heats the pot or pan base directly with no heat losses and without heating the glass

Induction hob

ceramic cooking zone unnecessarily. The food heats up more quickly as a result. The glass ce-
ramic cooking zone is heated by the recovered heat from the pot or pan only. This generally pre-
vents any food which boils over from burning. Induction-compatible pots and pans are required.
Pot detection: this function detects whether an induction-compatible pot or pan is being used. It
also detects whether the pot or pan being used is too small or if the pot or pan has been remo-
ved from the hot plate.
Overheating protection/empty pan protection: If the pot or pan is heated too much, the control
reduces the power supplied to the hob. The pre-set output is restored once the temperature is
reduced. If the pot or pan is overheated again, this process is repeated until the pot or pan is re-
moved or the hob power is reduced or switched off. This safety function can be activated if pots
and pans are heated until they become empty, for example or they are unsuitable or defective
(the base has become detached from the main part of a pot).
11